2011 macbook pro windows 10 setup without optical drive

#2011 MACBOOK PRO WINDOWS 10 SETUP WITHOUT OPTICAL DRIVE MAC OS X#
#2011 MACBOOK PRO WINDOWS 10 SETUP WITHOUT OPTICAL DRIVE MAC OS#
#2011 MACBOOK PRO WINDOWS 10 SETUP WITHOUT OPTICAL DRIVE ISO#

Be aware of this if you upgraded to a 1TB hard drive early on as some were 12.5mm. FYI: A lot of the optical bay 'caddys' only accept a 9.5mm hard drive. I've read conflicting views on whether it's possible.

#2011 MACBOOK PRO WINDOWS 10 SETUP WITHOUT OPTICAL DRIVE ISO#

I have a copy of Windows on DVD, and an ISO from MS website (which I installed on my 2013 iMac). However, reading here would suggest that the 17-inch early-2011 MacBook Pro may not support a 6.0 gigabit connection. The unibody macbook pro can take up to 12.5mm height hard drive. Is there a way to Bootcamp Windows 7 from USB on a MacBook Pro (early 2011) that has had the Optical Drive replaced with a HDD. Right out of the gate all of these models are proving 100 reliable for use of a SATA Revision 3.0 hard drive or OWC 6G SSD installed into the main drive bay. I checked in System Profiler, and it shows that the optical drive's link speed at 6 gigabits, with negotiated link speed at 1.5 gigabits therefore I'm guessing it's a SATA III capable connection that's simply throttled to the speed of the optical drive. As we mentioned last Monday, Apple has released new speed bumped MacBook Pro 13, 15, and 17 model laptops.These units all show 6Gb/s link capability for both the main drive bay and the optical bay. However, I am aware that in some 2011 MacBook Pros, the optical bay can use either a SATA II or SATA III connection.

#2011 MACBOOK PRO WINDOWS 10 SETUP WITHOUT OPTICAL DRIVE MAC OS#

I followed official ubuntu instructions for creating a bootable USB stick on Mac OS X. Pop the usb stick in and power on the Mac while holding the option key.

#2011 MACBOOK PRO WINDOWS 10 SETUP WITHOUT OPTICAL DRIVE MAC OS X#

I replaced the optical drive with a secondary hard drive, which has two partitions created with bootcamp: (1) Mac OS X Mavericks and (2) Windows 7. Answer: Just follow the distro you wants FAQ for creating a USB Live stick, it will pop open an option for install on disk or permanent storage. I have SSD as main drive and a HDD in 'Optical Drive', But it was taking too much battery/ too. My primary hard drive location has a mac os X yosemite installation. MacBook Pro (15-inch, Early 2011) - 2.2 GHz Intel Core i7. Samsung EVO 850 SSD SATA III working in Optical Drive now. Cancel the Windows 10 setup when files load.

That being said, I am considering swapping out my SuperDrive for a second hard drive вЂ“ keeping the OS and programs installed and running from the SSD, and saving documents and files on the HDD. Use a Windows 10 install DVD or USB and format blank hard drive though the setup. The speed is amazing, but I don't want to load too much data onto the drive since TRIM cannot be enabled in Yosemite without disabling kext signatures (I'm utilizing the disk garbage collection and do not wish to enable TRIM the more disk space available, the better the garbage collection firmware works on the SSD). I have an early-2011 MacBook Pro running OS X 10.10.2 (also Windows 7 Professional on a Boot Camp partition), and recently upgraded my hard drive to a 500GB SSD (Crucial MX100). Operating temperature: 50 to 95 F (10 to 35 C) Storage temperature: -13 to 113 F (-24 to 45 C) Relative humidity: 0 to 90 noncondensing.

2011 macbook pro windows 10 setup without optical drive